SHORT PATH DISTILLATION SYSTEMS
Installation and Basic Training Included with Every System Purchase.
The MINI-5 System is a lower cost, entry level distillation unit which could be upgraded to a higher processing rate system at a later date. The MINI-5 System utilizes a stainless steel support frame which can be installed on a laboratory bench or used as a floor standing system (frame size is: 45”W x 22”D x 54”H).
KDL-6TL & KDT-6TL SHORT PATH DISTILLATION SYSTEM
The KDL-6 and KDT-6 incorporate a wide variety of optional components to enhance the distillation process. The KD-6 series systems are specially designed to incorporate most of the high value options which will enable customers to distill product continuously or conduct more detailed R&D distillations where multiple samples could be obtained without breaking vacuum.
The RFT-6 laboratory Rolled Film Distillation system is suitable for feed rates from 0.40 to 6.0 kg/hr. Evaporator pressures as low as 1.0 mbar can be reached and evaporator temperatures can be as high as 350°C. The actual operating temperature associated with RFT-6 system is dependent upon the hot oil circulator supplied with the system.
Ask us about our Custom and Multistage Distillation Pilot Plants: Ethanol Extraction, Solvent Recovery and, Short Path Distillation. Single Stage, Double Stage, Triple stage and more.
- Dimensions: 33.8 L x 87.6 W x 40.5 H
- Extractor Power: 208 – 230 / 12A
- Vacuum Pump Power: 115 or 208 / 15A or 2.8A
- Maximum Plant Material Load Capacity: 3000 g / 6.61 lb
- Ethanol Capacity: 24 gal
- Emulsion Recovery Efficiency: 85%
- Extraction Efficiency: 98.6%
- Run time est. 20-30 minutes
- Winterization in-line! Leave behind the the waxes!